How to upload a sketch with the Arduino IDE 2.0
Updated
In the Arduino environment, we write sketches that can be uploaded to Arduino boards. You need to select a board connected to your computer, and how to upload a sketch to that board, using the Arduino IDE 2.0.
Verify VS Upload
There are two main tools when uploading a sketch to a board: verify and upload. The verify tool simply goes through your sketch, checks for errors and compiles it. The upload tool does the same, but when it finishes compiling the code, it also uploads it to the board.
Uploading a sketch
1. Open the Arduino IDE 2.0.
2. With the editor open, let's take a look at the navigation bar at the top. At the very left, there is a checkmark and an arrow pointing right. The checkmark is used to verify, and the arrow is used to upload.
3. Click on the verify tool (checkmark). Since we are verifying an empty sketch, we can be sure it is going to compile. After a few seconds, we can see the result of the action in the console (black box in the bottom).
4. Now we know that our code is compiled, and that it is working. Now, before we can upload the code to our board, we will first need to select the board that we are using. We can do this by navigating to Tools > Port > {Board}. The board(s) that are connected to your computer should appear here, and we need to select it by clicking it.
5. With the board selected, we are good to go! Click on the upload button, and it will start uploading the sketch to the board.
6. When it is finished, it will notify you in the console log. Of course, sometimes there are some complications when uploading, and these errors will be listed here as well.